OSRAM|Profesionales|ECE|News ECG & LMS|index

Touch DIM operation for ample lighting installations

For up to 64 DALI luminaires with one DALI-Repeater
For more than 64 DALI luminaires with multiple DALI-Repeater
Free cascading when using multiple DALI-Repeater; for unlimited amount of luminaires
Now for big cable lengths

Born to control LED

DMX dimmers are used to control
constant voltage LED modules via a DMX control unit
(e.g. EASY DMX...SO).

Available in 3 versions:

EN 55015:2006 + A1:2007

The international standard CISPR 15 regarding radio interference suppression has been tightened.
Limits are now up to 300 MHz (previously 30 MHz).
In Europe, it has been embedded within EN 55015 and is valid from May 2010.

All OSRAM ECGs are already adapted.

Leading in saving energy:

QTi DALI – now double efficient

A1 BAT - best CELMA Energy Efficiency Index
Lowest stand-by losses:
- 1- and 2 lamp DALI ECGs = 0.2 W (AC and DC)
- 3- and 4 lamp DALI ECGs = 0.5 W (AC and DC)

Dimmable ECGs with DALI

Product change

Leading in saving energy

QUICKTRONIC INTELLIGENT – Generation II:
The ECG family with the best CELMA Energy Efficiency Index
A2 BAT.
Exploit the potential of energy saving when combining QTi GII with Light Management Systems MULTIeco. Thanks to high switching capability it is suitable for motion sensor applications.

100.000-hours ECGs

Tried and tested a millionfold:

Dimmable ECGs QUICKTRONIC INTELLIGENT
QTi DALI...DIM
QTi...DIM
Non-dimmable ECGs: QUICKTRONIC PROFESSIONAL
QTP8 for T8 lamps
QTi GII and QTP5 for T5 lamps
QTP-DL for compact fluorescent lamps
OSRAM DULUX L, F

Longlife, like at BMW since 20 years

Amalgam technology: CONSTANT

CONSTANT luminous flux for significantly more light from cold or hot luminaires

Lamps available as T5 (Ø 16 mm) and compact fluorescent lamps
Optimal dimmable with OSRAM ECGs:
- Up to 1 % power at lamps
T5 CONSTANT and OSRAM DULUX L CONSTANT
- Up to 3 % power at lamps
OSRAM DULUX T/E CONSTANT
Ignition down to -20 °C when using QUICKTRONIC PROFESSIONAL