OTi DALI 210/220-240/24 1-4 CH
Beneficios del producto
- Long lasting and high reliability
- From 1 to 4 channels to arbitrarily distribute the power
- Suitable for installation under sunlight
- IP66/IP67 Salt mist resistant and DC functionality
- AstroDim functionality for automatic dimming and turn on/off
Áreas de aplicación
- Public squares and architecture lighting
- In building facades, luminous signage
- Apto para instalaciones SELV de interior y de zonas exteriores
- Suitable for use in luminaires of protection class I
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
230 240 V
Frecuencia de red
50/60 Hz
Tensión de entrada
198 264 V
Distorsión armónica total
< 5 %
Factor de potencia λ
> 0,95
Efficiency in full-load
93%
Pérdida de potencia del equipo
18.4 W
Corriente de encendido IP
3.7 A
Nº de ECE máximos con automátic 10 A (B)
7
Nº de ECE máximos con automátic 10 A (B)
7
Nº de ECE máximos con automátic 16 A (B)
11
Nº de ECE máximos con automátic 16 A (B)
11
Nº de ECE máximos con automátic 25 A (B)
17
Resis. a la sobretensión (L/N-tierra)
8 kV
Tensión de aislamiento (L-N)
6 kV
Tensión de salida
24.7 V
U-OUT
24.7 V
Potencia de salida
210 W
Potencia de salida máxima
210 W
Aislamiento galvánico
SELV
Aislamiento galvanizado prim./secund.
3 kV
Output ripple Voltage (100 Hz)
< 5 %
Output PWM frequency
1k Hz
Tensión cc
176 276 V
Dimensiones y peso
Distancia entre taladros longitud
326.0 mm
Peso del producto
1415,00 g
Sección de cable, entrada
1,0 mm²
Sección de cable, salida
1,5 mm²
Long aislamiento parte de la entrada
90 mm
Long aislamiento parte de la salida
90 mm
Distancia entre taladros anchura
320.0 mm
Ancho
69,0 mm
Alto
37,0 mm
Largo
330,0 mm
Colores y materiales
Material de la carcasa
Aluminium
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-20 +60 °C
Temp. máx. en el punto de prueba tc
85 °C
Temp. máx de la carcasa en caso de fallo
110 °C
Temperatura de almacenamiento
-40 +85 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
50000 h
Capacidades
Regulable
Sí
Interfaz DIM
DALI-2
Margen de regulación
0.1 100 %
Regulador
Pulse Width Modulation
Protección contra sobrecalentamiento
Desconexión automática, reversible
Protección contra sobrecarga
Automático reversible
Protección contra cortocircuito
Automático reversible
Prueba de no carga
Sí
Intended for no-load operation
No
Apto para luminarias con clase de prot.
I
Tipo de conexión, entrada lateral
Wires
Tipo de conexión, salida lateral
Wires
Number of channels
4
Certificados & Normas
Símbolos de homologación
BIS / CCC / CE / EAC / ENEC 10 / RCM / VDE / VDE-EMC
Normas
Según EN 61347-2-13/Según EN 61547/Según EN 55015/Según EN 61000-3-2/Según EN 61000-3-3/Según EN 61347-1/Según EN 62493
Tipo de protección
I
Tipo de protección
IP66/IP67
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
30-08-2023
Primary Article Identifier
4062172032087
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
2aa25e91-6f84-40c5-8e57-f9de80b14741
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4062172032087 |
FS
| 1 | 361mm x 81mm x 84mm | 1468.00g | 2.46dm³ |
4062172032094 |
VS
| 6 | 380mm x 262mm x 201mm | 9195.00g | 20.01dm³ |
Descargas
Más sobre la familia de productos
Características del producto
- 1 to 4 DALI addressable channels
- LED driver whose output power can be shared arbitrarily among the 1 or 4 channels
- AstroDim functionality
- Dimming range: 0/0, 1 100 %
- Frecuencia de línea: 0 Hz | 50 Hz | 60 Hz
- High level surge protection: up to 6 kV (L-N), 8 kV (L/N-PE)
- Inrush current limiter circuit
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OTi DALI 210/220-240/244CHDT6/8 P
|
0...210 W | Sí | 330,0 mm | 69,0 mm | 37,0 mm | |||
OTi DALI 210/220-240/24 1-4 CH
|
210 W | Sí | 330,0 mm | 69,0 mm | 37,0 mm | |||
OTi DALI 100/220-240/24 1-4 CH P
|
100 W | Sí | 237,0 mm | 69,0 mm | 37,0 mm |