OT FIT 300/220-240/12 P
Beneficios del producto
- Ámbito de aplicación versátil gracias al rango de potencia de salida de hasta 120 W
- Elevada protección de sobretensión: hasta 3 kV (L-N) / 6 kV (L/N-PE)
Áreas de aplicación
- Apto para instalaciones de interior y de zonas exteriores
- Ideal para el montaje en espacios muy reducidos
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
220 240 V
Frecuencia de red
50 60 Hz
Tensión de entrada
198 264 V
Distorsión armónica total
< 5 %
Factor de potencia λ
0,95
Efficiency in full-load
91 %
Pérdida de potencia del equipo
28 W
Corriente de encendido IP
70 A
Nº de ECE máximos con automátic 10 A (B)
4
Nº de ECE máximos con automátic 10 A (B)
2
Nº de ECE máximos con automátic 16 A (B)
4
Nº de ECE máximos con automátic 16 A (B)
7
Nº de ECE máximos con automátic 25 A (B)
6
Tensión de aislamiento (L-N)
6 kV
Tensión de salida
12,5 V
U-OUT
13 V
Potencia de salida
300 W
Potencia de salida máxima
300 W
Aislamiento galvánico
SELV
Output ripple Voltage (100 Hz)
< 3 %
Resis. a la sobretensión (L/N-tierra)
6 kV
Dimensiones y peso
Distancia entre taladros longitud
251 mm
Peso del producto
1510,00 g
Sección de cable, entrada
1,0 mm²
Sección de cable, salida
2,5 mm²
Long aislamiento parte de la entrada
60 mm
Long aislamiento parte de la salida
10 mm
Ancho
83,0 mm
Largo
266,0 mm
Distancia entre taladros anchura
34,0 mm
Alto
39,5 mm
Colores y materiales
Material de la carcasa
Metal
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-40 +50 °C
Temp. máx. en el punto de prueba tc
90 °C
Temp. máx de la carcasa en caso de fallo
-
Temperatura de almacenamiento
-40 +85 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
50000 h
Capacidades
Regulable
No
Protección contra sobrecalentamiento
Desconexión automática, reversible
Protección contra sobrecarga
Automático reversible
Protección contra cortocircuito
Automático reversible
Prueba de no carga
Sí
Intended for no-load operation
No
Apto para luminarias con clase de prot.
I
Tipo de conexión, entrada lateral
Wires
Tipo de conexión, salida lateral
Wires
Number of channels
1
Certificados & Normas
Símbolos de homologación
CE / CCC / ENEC / TISI / RCM
Normas
Según EN 61347-1/Según EN 61347-2-13/Según EN 55015/Según EN 61547/Según EN 61000-3-2/Según EN 61000-3-3/Según EN 60598-1/Según EN 62384
Tipo de protección
I
Tipo de protección
IP66/IP67
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
08-09-2023
Primary Article Identifier
4062172133548
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
f6f619d4-fd85-43b3-ad54-4e74de23f6ac
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4062172133548 |
UNV
| 1 | 266mm x 83mm x 40mm | 1510.00g | 0.87dm³ |
4062172133555 |
VS
| 10 | 419mm x 329mm x 123mm | 15747.00g | 16.96dm³ |
Descargas
Más sobre la familia de productos
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OT FIT 60/220-240/12 P
|
60 W | No | 157,0 mm | 53,0 mm | 31,5 mm | |||
OT FIT 150/220-240/12 P
|
150 W | No | 202,0 mm | 53,0 mm | 31,5 mm | |||
OT FIT 300/220-240/12 P
|
300 W | No | 266,0 mm | 83,0 mm | 39,5 mm |