OT 20/220 240/24
Beneficios del producto
- Installation in cold and hot environments
Áreas de aplicación
- Apto para instalaciones de interior y de zonas exteriores
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
220 240 V
Frecuencia de red
50 60 Hz
Tensión de entrada
198 264 V
Tensión cc
-
Distorsión armónica total
150 %
Factor de potencia λ
0,50
Efficiency in full-load
83 %
Pérdida de potencia del equipo
4,0 W
Corriente de encendido IP
17 A
Nº de ECE máximos con automátic 10 A (B)
23
Nº de ECE máximos con automátic 10 A (B)
-
Nº de ECE máximos con automátic 16 A (B)
-
Nº de ECE máximos con automátic 16 A (B)
42
Nº de ECE máximos con automátic 25 A (B)
-
Tensión de aislamiento (L-N)
1 kV
Tensión de salida
24 V
U-OUT
24 V
Potencia de salida
20 W
Potencia de salida máxima
20 W
Aislamiento galvánico
SELV
Aislamiento galvanizado prim./secund.
3 kV
Resis. a la sobretensión (L/N-tierra)
-
Output ripple Voltage (100 Hz)
-
Dimensiones y peso
Distancia entre taladros longitud
-
Peso del producto
108,00 g
Sección de cable, entrada
0,75 1,5 mm²
Sección de cable, salida
0,5 1,5 mm²
Long aislamiento parte de la entrada
10 mm
Long aislamiento parte de la salida
10 mm
Longitud del cable de entrada
-
Longitud del cable de salida
-
Largo
109,0 mm
Alto
35,0 mm
Ancho
50,0 mm
Colores y materiales
Material de la carcasa
Plastic
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-20 +50 °C
Temp. máx. en el punto de prueba tc
70 °C
Temp. máx de la carcasa en caso de fallo
90 °C
Temperatura de almacenamiento
-40 +85 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
30000 h
Capacidades
Regulable
No
Protección contra sobrecalentamiento
Desconexión automática, reversible
Protección contra sobrecarga
Automático reversible
Protección contra cortocircuito
Automático reversible
Prueba de no carga
Sí
Intended for no-load operation
No
Apto para luminarias con clase de prot.
II
Tipo de conexión, salida lateral
Terminal con tornillo
Number of channels
1
Certificados & Normas
Símbolos de homologación
CE / ENEC 10 / VDE / VDE-EMC / RCM
Normas
Según IEC 61347-2-13/Según IEC 62384/Según EN 55015/Según IEC 61000-3-2/Según IEC 61000-3-3/Según IEC 61547
Tipo de protección
II
Tipo de protección
IP20
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
02-08-2023
Primary Article Identifier
4050300618111
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
358f82b4-6247-4365-a7f9-51531ea4c64f
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4050300618111 |
UNV
| 1 | 109mm x 50mm x 35mm | 108.00g | 0.19dm³ |
4050300618128 |
VS
| 20 | 270mm x 229mm x 94mm | 2337.00g | 5.81dm³ |
Descargas
Más sobre la familia de productos
Características del producto
- Wide operating temperature range: -20 +50 °C
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OT SLIM 30/220-240/24
|
30 W | No | 270,0 mm | 30,0 mm | 17,5 mm | |||
OT SLIM 60/220-240/24
|
60 W | No | 338,0 mm | 30,0 mm | 17,5 mm | |||
OT SLIM 100/220-240/24
|
100 W | No | 374,0 mm | 30,0 mm | 18,5 mm | |||
OT SLIM 160/220-240/24
|
160 W | No | 404,0 mm | 30,0 mm | 21,5 mm | |||
OT SLIM 250/220-240/24
|
250 W | No | 343,0 mm | 60,0 mm | 31,0 mm | |||
OT 6/200
240/24 CE
|
6 W | No | 51,0 mm | 50,0 mm | 22,0 mm | |||
OT 20/220
240/24
|
20 W | No | 109,0 mm | 50,0 mm | 35,0 mm |