FX-SC08-G2-CT4PJ

Beneficios del producto
  • Instalación sencilla, sin necesidad de herramientas o soldadura (CONNECTsystem)
  • Tiempo de instalación reducido (CONNECTsystem)
  • Puede conectarse a la parte frontal del módulo o a los puntos de división (CONNECTsystem)
  • Perfil bajo (CONNECTsystem)

Datos técnicos

Dimensiones y peso

Largo

9,0 mm

Peso del producto

0,80 g

Alto

5,9 mm

Ancho

9,2 mm

Datos logísticos

Número estadístico de material

85366990990

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

30-08-2022

Primary Article Identifier

4052899464858

Candidate List Substance 1

No declarable substances contained

Declaration No. in SCIP database

No declarable substances contained

Información de embalaje

EAN

Unidad

Pieza

Dimensiones

Peso

Volumen

4052899464858 UNV

Sin embalaje

1 800.00g
4052899464865 FS2

Estuche de cartón

25 143mm x 122mm x 47mm 64.00g 0.82dm³
4052899464872 VS

Embalaje de envío

1250 510mm x 340mm x 315mm 3914.00g 54.62dm³

Descargas

Más sobre la familia de productos

Características del producto
  • Quick and easy installation
  • Compatible with TEC Flex
Ecodesign regulation information:
  • This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
  • Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
  • In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
    In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified.
  • Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
    Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Productos