LUXeye Sense DALI BT

Beneficios del producto
  • Elemento de sensor de luz con corrección V(?)
Áreas de aplicación
  • Oficinas
  • Salas de conferencias
  • Salas de entrenamiento
  • Pasillos
Equipamiento / Accesorios
  • Apto para un máximo de 20 equipos de conexión electrónicos

Datos técnicos

Datos eléctricos

Tensión nominal

220…240 V

Frecuencia de red

50…60 Hz

Potencia de sistema

0,40 W

Dimensiones y peso

Diámetro

95,0 mm

Alto

81,0 mm

Peso del producto

144,00 g

Espaciado del orifi. de mont., diagonal

68…80 mm

Colores y materiales

Color del producto

Blanco

Temp. y condiciones de funcionamiento

Margen de temperatura ambiente

0…+55 °C

Capacidades

Regulable

No

Interfaz DIM

DALI

Cobertura emisora

15 m

Altura máxima de instalación

5 m

Zona de detección

10 m²

Diameter for movement detection at 5 m installation high

Ángulo de detección

110 °

Tipo de montaje

Montaje techo

Commissioning tool

App (Android/ iOS)

Area de trabajo del sensor de luz

20…5000 lx

Approximately, measured at the sensor

Número de salidas de control

20

Scenes

16

Each DALI ECG can store up to 16 light scenes.

Max. connectable push button couplers

3

Max number pro DALI line. The actual number depends on the total number of DALI devices (couplers, sensors and ECGs) connected on the same DALI line

App Control

Yes (Android/ iOS)

Certificados & Normas

Tipo de protección

IP20

Tipo de protección

II

Datos logísticos

Número estadístico de material

85371098990

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

18-08-2023

Primary Article Identifier

4052899957411

Declaration No. in SCIP database

In work

Información de embalaje

EAN

Unidad

Pieza

Dimensiones

Peso

Volumen

4052899957411 FS

Estuche de cartón

1 160mm x 125mm x 90mm 251.00g 1.80dm³
4052899957459 VS

Embalaje de envío

12 495mm x 265mm x 192mm 3285.00g 25.19dm³

Descargas

Accesorios opcionales

Más sobre la familia de productos

Características del producto
  • Regulación dependiente de la luz natural y control de luz dependiente de la presencia
  • Carcasa de plástico halógeno sin policarbonatos
  • Identificación de presencia mediante elemento IR pasivo
Tender text

OSRAM LUXeye Sense DALI BT
Light control unit with integrated sensors for presence and daylight dependent regulation of artificial light; with Bluetooth- interface to configure and control the light per APP; DALI- interface to control the luminaires

  • DALI interface with electronic reversible over temperature-, short cut and overload protection
  • DALI Broadcast – support: No addressing necessary
  • Controls up to 20 DALI- driver
  • Push Button interface for standard push button control
  • Presence detection via Passive IR element (Motion detection area: Ø6m at 2,5m mounting height; Ø10m at 5m mounting height)
  • V(Lambda)-corrected light sensor element
  • Function indicator via RGB - LED
  • Light sensing range: 20 – 5.000lx (measured at the sensor)
  • Up to three OSRAM DALI sensors connectable to extend the detection area
  • Up to three OSRAM DALI Pro PB-coupler connectable for additional push button control
  • Auto- commissioning after mains switch on to factory settings (set point light sensor = 80% of the max. artificial light level; delay time = 15min)
  • Two rotary switches for easy adaption of the light level and delay time via screw driver (while operating)
  • Predefined operation modes for simplified commissioning, individual adjustment of functional parameters via Smartphone with the Config - APP
  • Polycarbonate plastic housing, flame resistant
  • Color: White
  • Dimensions: 95 x 81 mm (D x H)
  • Connectors: Plug with screw less push wire terminals; Integrated cable clamp
  • Mounting type: Ceiling integrated (min. ceiling depth: 55mm; Installation hole Ø 68 – 80mm) Optional: Ceiling mounting via separate mounting adapter LUXeye Sense CM KIT
  • Bluetooth interface: 4.0 LE (range max. 15m)
  • Supported operating systems: Android 4.x or newer / iOS 8.4 or newer
  • Operating voltage: AC 220 – 240 V
  • Power consumption: 0,3 W – 1,8 W (depending on the number of connected DALI devices)
  • Ambient temperature range: 0°C - +55°C
  • Type of protection: IP 20
  • Protection class: II
  • DALI Standard: IEC 62386 Ed. 1
  • Safety Standards: EN 60669-1, EN 60669-2-1, EN 62479
  • EMC/ EMI Standards: EN 55015, EN 55022, EN 61000-3-2, EN 61000-3-3
  • EMC- Immunity: EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
  • EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
  • Communications- Standards : EN 62386 Ed.1, ETSI EN 300 328, ETSI EN 301 489-1, ETSI EN 301 489-17
  • Included accessories: 2x shutter for different detection areas
  • Product name: LUXeye Sense DALI BT
  • EAN: 4052899957411

Productos

Sort by:
Nombre del producto
Regulable
Interfaz DIM
Tensión nominal
Ángulo de detección
Zona de detección
Fichas técnicas
LUXeye Sense DALI BT
No DALI 220…240 V 110 ° 10 m²