OPTOTRONIC FIT D CS L (Dip Switch) EL
Características del producto
- Frecuencia de línea: 0 Hz | 50 Hz | 60 Hz
- Tensión de suministro: 220 240 V
- Tensión de línea: 198 264 V
- Wide output current range
- Vida útil: hasta 100.000 h (temperatura a Tc = 65 °C, cuota de fallos máx. de 10 %)
Beneficios del producto
- Flexible current setting (DIPswitch 6 currents)
- Más alta calidad de luz gracias a la baja corriente de ondulación
- User flexibility with six different output currents from one driver
- Requisito de seguridad debido a la protección contra sobrecarga, sobretemperatura, cortocircuito
- Larga vida útil segura a temperaturas máximas permitidas
- Enable slim fixture design with flat 21 mm height metal housing
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OT FIT 18/220
240/350 D CS L
|
32...54 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 40/220
240/350 D CS L
|
40 120 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 60/220
240/350 D CS L
|
90 175 V | 100 / 150 / 200 / 250 / 300 / 350 mA | 210,0 mm | 30,0 mm | 21,0 mm | |||
OT FIT 75/220...240/550 D CS L
|
90 216 / 90 188 / 90 167 / 90 150 / 90 136 V | 300 / 350 / 400 / 450 / 500 / 550 mA | 210,0 mm | 30,0 mm | 21,0 mm |
Más sobre la familia de productos
Áreas de aplicación
- Apto para luminarias con clase de protección I
- Instalación en sistemas de iluminación de emergencia conforme a IEC 61347-2-13, apéndice J
- Apto para instalación en sistemas de iluminación de emergencia conforme a EN 60598-2-22
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.