ELEMENT 40/220…240/350 D CS L

Áreas de aplicación
  • Apto para luminarias con clase de protección I

Datos técnicos

Datos eléctricos

Tensión de entrada nominal

220…240 V

Frecuencia de red

50/60 Hz

Tensión de entrada

198…264 V

Current set

DipSwitch

Factor de potencia λ

098

Carga total a 230 V/50 Hz

Efficiency in full-load

93 %

at 230 V, 50 Hz

Pérdida de potencia del equipo

2,6 W

A 230 V

Corriente de encendido IP

18 A

twidth = 100 μs typical (measured at 50 % Ipeak)

Nº de ECE máximos con automátic 10 A (B)

30

Nº de ECE máximos con automátic 10 A (B)

30

Nº de ECE máximos con automátic 16 A (B)

48

Nº de ECE máximos con automátic 16 A (B)

48

Resis. a la sobretensión (L/N-tierra)

2 kV

Tensión de aislamiento (L-N)

1 kV

Tensión de salida

55…120 V

At 200/250mA

Corriente de salida

200 / 250 / 300 / 350 mA

±5%

Corriente de salida rizada (100 Hz)

< 30 %

Output PSTLM

≤1

Output SVM

≤0.4

Potencia de salida

11...42 W

Potencia de salida máxima

42 W

Distorsión armónica total

< 20 %

U-OUT

< 250 V

Corriente de salida tolerancia

±7.5 %

Aislamiento galvánico

Non isolated

Default output current

350 mA

Dimensiones y peso

Distancia entre taladros longitud

200,0 mm

Peso del producto

12600 g

Sección de cable, entrada

0,5…1,5 / 0,75…1,5 mm²

Guías sólidas o flexibles

Sección de cable, salida

0,5…1,5 / 0,75…1,5 mm²

Guías sólidas o flexibles

Long aislamiento parte de la entrada

8,5…9,5 mm

Ancho

300 mm

Largo

2100 mm

Long aislamiento parte de la salida

8,5…9,5 mm

Alto

210 mm

Colores y materiales

Material de la carcasa

Metal

Temp. y condiciones de funcionamiento

Margen de temperatura ambiente

-20…+50 °C

Temp. máx. en el punto de prueba tc

75 °C

Temp. máx de la carcasa en caso de fallo

110 °C

Temperatura de almacenamiento

-25…85 °C

Humedad en el aire

5…85 %

Sin condensación

Duración de vida

ECE vida útil

35000 / 50000 h

At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate

Temperature at the measuring point tc (°C)

75 °C

Capacidades

Regulable

No

Protección contra sobrecalentamiento

Desconexión automática, reversible

Protección contra sobrecarga

Automático reversible

Protección contra cortocircuito

Automático reversible

Prueba de no carga

Longitud cableado máx. ECE/lámpara

2,0 m

Output wires must be routed as close as possible to each other

Apto para luminarias con clase de prot.

I

Number of channels

1

Programming

Programming device

DIPswitch

Certificados & Normas

Símbolos de homologación

CE / ENEC 05 / EAC / CCC / BIS / RCM

Normas

Según IEC 61347-1/Según IEC 61347-2-13/Según IEC 62384/Según IEC 61000-3-2/Según IEC 61000-3-3/Según IEC 61547

Tipo de protección

IP20

Datos logísticos

Número estadístico de material

85044083900

Environmental information


Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration

25-04-2022

Primary Article Identifier

4052899553095

Candidate List Substance 1

Lead

CAS No. of substance 1

7439-92-1

Safe Use Instruction

The identification of the Candidate List substance is sufficient to allow safe use of the article.

Declaration No. in SCIP database

422ed448-15a7-465f-9d51-518e05543056

Información de embalaje

EAN

Unidad

Pieza

Dimensiones

Peso

Volumen

4052899553095 UNV

Sin embalaje

1 210mm x 30mm x 21mm 126.00g 0.13dm³
4052899553101 VS

Embalaje de envío

20 228mm x 138mm x 150mm 2718.00g 4.72dm³

Descargas

Más sobre la familia de productos

Características del producto
  • Frecuencia de línea: 50 Hz | 60 Hz
  • Tensión de suministro: 220…240 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.

Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.

Productos

Sort by:
Nombre del producto
Tensión de salida
Corriente de salida
Largo
Ancho
Alto
Fichas técnicas
ELEMENT 18/220…240/350 D CS L
25…54 V 200 / 250 / 300 / 350 mA 2100 mm 300 mm 210 mm
ELEMENT 40/220…240/350 D CS L
55…120 V 200 / 250 / 300 / 350 mA 2100 mm 300 mm 210 mm
ELEMENT 60/220…240/350 D CS L
90…175 V 200 / 250 / 300 / 350 mA 2100 mm 300 mm 210 mm