GFDT400RGB G1-RGB-05
Beneficios del producto
- IP67 protection for truly outdoor application
- 120° viewing angle per module
- Continuous length up to 8 m by powering one end
Áreas de aplicación
- Iluminación de acento
- Iluminación de bóvedas
- Architectural lighting
- Iluminación decorativa
- Border lighting
- Señalización
- Outdoor and indoor contour lighting
Datos técnicos
Datos Fotométricos
Flujo luminoso por metro
380 lm
Flujo luminoso
1900 lm
Dimensiones y peso
Ancho
16,5 mm
Alto
17,0 mm
Peso del producto
1825,00 g
Largo
5000 mm
Datos logísticos
Número estadístico de material
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
25-08-2023
Primary Article Identifier
4062172106351
Candidate List Substance 1
No declarable substances contained
Declaration No. in SCIP database
No declarable substances contained
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
|---|---|---|---|---|---|
| 4062172106351 |
FS
| 1 | 620mm x 510mm x 55mm | 2618.00g | 17.39dm³ |
| 4062172106368 |
VS
| 3 | 630mm x 520mm x 181mm | 9110.00g | 59.30dm³ |
Descargas
Fichas técnicas
Más sobre la familia de productos
Características del producto
- RGB with diffuse TOP view solution
- Extremely flat profile for slimline project
- Uniform & even light source with invisible light dots
- Up to 50,000 hrs lifetime @ tc max
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
| Nombre del producto |
|
Fichas técnicas | ||
|---|---|---|---|---|
|
|
GFDT400RGB G1-RGB-05
|
380 lm |