GFDS400-G1 857-05
Beneficios del producto
- Cut to length each 41.7 mm
- 10x10 mm super slim design, fit for embedded applications
- Diffuse version, side emitting, high light uniformity without spot or dark area
- IP67 protection for truly outdoor application
Áreas de aplicación
- Outdoor and indoor contour lighting
- Señalización
- Iluminación de bóvedas
- Iluminación decorativa
- Architectural lighting
- Iluminación de acento
Datos técnicos
Datos eléctricos
Nivel de potencia nominal por metro
6,0 W
Datos Fotométricos
Temperatura de color
5700 K
Tono de luz (denominación)
5700 K
Flujo luminoso por metro
425 lm
Datos técnicos de illuminación
Ángulo de radiación
110 °
LED pitch
6.95 mm
Información módulos LED
Número de LEDs por metro
144
Número de LED por unidad más pequeña
6
Dimensiones y peso
Longitud unidad más pequeña
41.7 mm
Largo
NaN mm
Alto
10,5 mm
Ancho
NaN mm
Colores y materiales
Material del cuerpo
Silicone
Material cobertura
Silicone
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-40 +55 °C
Rendimiento temp. según norma IEC 62717
RG0
Capacidades
With connection set
Sí
Control interface
-
With end piece
No
Lowest bending radius
100 mm
Detection angle (Light sensor)
-
Detection angle (PIR)
-
Certificados & Normas
Tipo de protección
IP67
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
29-03-2024
Declaration No. in SCIP database
In work
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4062172194761 |
FS
| 1 | 455mm x 345mm x 40mm | 1270.00g | 6.28dm³ |
4062172194778 |
VS
| 3 | 475mm x 360mm x 145mm | 4530.00g | 24.80dm³ |
Descargas
Más sobre la familia de productos
Características del producto
- 3 SDCM, CRI80
- Large selection of lighting color temperatures
- 110° viewing angle per module
- Up to 50,000 h lifetime @ tc max
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
GFDS400-G1 827-05
|
2700 K | 2700 K | 80 | 410 lm | 6,0 W | |||
GFDS400-G1 830-01
|
3000 K | 3000 K | 80 | 410 lm | 6,0 W | |||
GFDS400-G1 830-05
|
3000 K | 3000 K | 80 | 410 lm | 6,0 W | |||
GFDS400-G1 835-01
|
3500 K | 3500 K | 80 | 440 lm | 6,0 W | |||
GFDS400-G1 835-05
|
3500 K | 3500 K | 80 | 440 lm | 6,0 W | |||
GFDS400-G1 840-01
|
4000 K | 4000 K | 80 | 440 lm | 6,0 W | |||
GFDS400-G1 840-05
|
4000 K | 4000 K | 80 | 440 lm | 6,0 W | |||
GFDS400-G1 850-01
|
5000 K | 5000 K | 80 | 430 lm | 6,0 W | |||
GFDS400-G1 850-05
|
5000 K | 5000 K | 80 | 430 lm | 6,0 W | |||
GFDS400-G1 857-01
|
5700 K | 5700 K | 80 | 425 lm | 6,0 W | |||
GFDS400-G1 857-05
|
5700 K | 5700 K | 425 lm | 6,0 W | ||||
GFDS600-G1 827-01
|
2700 K | 2700 K | 80 | 620 lm | 9,0 W | |||
GFDS600-G1 827-05
|
2700 K | 2700 K | 80 | 620 lm | 9,0 W | |||
GFDS600-G1 830-01
|
3000 K | 3000 K | 80 | 620 lm | 9,0 W | |||
GFDS600-G1 830-05
|
3000 K | 3000 K | 80 | 620 lm | 9,0 W | |||
GFDS600-G1 835-01
|
3500 K | 3500 K | 80 | 640 lm | 9,0 W | |||
GFDS600-G1 835-05
|
3500 K | 3500 K | 80 | 640 lm | 9,0 W | |||
GFDS600-G1 840-01
|
4000 K | 4000 K | 80 | 640 lm | 9,0 W | |||
GFDS600-G1 840-05
|
4000 K | 4000 K | 80 | 640 lm | 9,0 W | |||
GFDS600-G1 850-01
|
5000 K | 5000 K | 80 | 630 lm | 9,0 W | |||
GFDS600-G1 850-05
|
5000 K | 5000 K | 630 lm | 9,0 W | ||||
GFDS600-G1 857-01
|
5700 K | 5700 K | 80 | 600 lm | 9,0 W | |||
GFDS600-G1 857-05
|
5700 K | 5700 K | 600 lm | 9,0 W |