LF500-G1-925-10 L2
Datos técnicos
Datos eléctricos
Tensión nominal
240 V
Tipo de corriente
corriente continua (CC)
Nivel de potencia nominal por metro
3,9 W
Potencia nominal
3900 W
Margen de voltaje
23 25 V
Accidental reverse input voltage protection up to
25 V
Datos Fotométricos
Tono de luz LED
blanco
Índice de reproducción cromática Ra
≥90
Flujo luminoso por metro
400 lm
Flujo luminoso total útil
4000 lm
Eficacia luminosa
103 lm/W
Desviación estándar de ajuste de color
≤3 sdcm
Tono de luz (denominación)
2500 K
Temperatura de color
2485 K
Temperatura de color
2485 K
Datos técnicos de illuminación
LED pitch
14.29 mm
Ángulo de radiación
120 °
Tiempo de arranque
< 05 s
Tiempo de precalentamiento (60 %)
< 050 s
Información módulos LED
Número de LEDs por metro
70
Número de LED por unidad más pequeña
7
Dimensiones y peso
Largo
100000 mm
Longitud unidad más pequeña
100,0 mm
Peso del producto
8640 g
Sección de cable, entrada
0.51 mm²
Alto
140 mm
Ancho
800 mm
Temp. y condiciones de funcionamiento
Rendimiento temp. según norma IEC 62717
35 °C
Área de temperatura de funcionamiento
-30 75 °C
Temperatura de almacenamiento
-40 85 °C
Duración de vida
Vida útil lámpara
60000 h
Vida útil nominal lámpara
60000 h
Factor manten.lumen final vida útil nomi
070
Número de ciclos de encendidos
15000
Datos adicionales del producto
ID of contained light source [AGGR]
LS_TRV_285890
Capacidades
Lowest bending radius
20 mm
Self-adhesive
Sí
With connection set
No
With end piece
No
Certificados & Normas
Consumo de energía
43 kWh/1000h
Normas
CE/UL/ENEC/EAC
Tipo de protección
IP20
Energy efficiency class of the contained light source
F
Datos logísticos
Número estadístico de material
85395100000
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
21-04-2023
Primary Article Identifier
4062172272056
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
f9dc1461-ffc1-439f-9a45-4d953e74c920
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4062172272056 |
FS
| 1 | 186mm x 190mm x 29mm | 179.00g | 1.02dm³ |
4062172272063 |
VS
| 8 | 241mm x 195mm x 205mm | 1624.00g | 9.63dm³ |
Descargas
Accesorios opcionales
Más sobre la familia de productos
Ecodesign regulation information:
- This product is considered to be a "containing product" in the sense of Regulations (EU) 2019/2020 and (EU) 2019/2015.
- Tolerances of the reported values, are according to LED Modules Performance standard IEC/EN 62717.
- In general, the replacement of the contained light sources without permanent damage to the product with the use of common available tools is possible in the final application when they can be dismantled from the installation environment and substituted for the necessary number of light sources restoring its full electrical/mechanical/thermal/optical functionality by means of a professional installer.
In the contrary, and limited to the LINEARlight Flex Diffuse, LINEARlight Rigid Finesse, GINO LED Flex Diffuse and LUMINENT Milky product families, the contained light source is an integrated part of the containing product and its removal can only be done by causing a permanent damage to the containing product due to its tight mechanical, electrical, optical, thermal interaction and/or environmental protection with or from the containing product. Therefore, a replacement of the light source with the use of common available tools is not justified. - Dismantling of light sources from containing products at end of life: Containing products with light sources which are scalable in length can be cut to the length of the contained light source and if applicable mechanically detached from protective and/or optical covers. Containing products shall be separated from building material and/or from other additional mounting accessories by means of a professional installer.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
Fichas técnicas | ||
---|---|---|---|---|---|
LF500-G1-925-10 L2
|
≥90 | 400 lm | |||
LF500-G1-927-10 L2
|
≥90 | 400 lm | |||
LF500-G1-930-10 L2
|
≥90 | 400 lm | |||
LF500-G1-940-10 L2
|
≥90 | 440 lm | |||
LF500-G1-840-10 L2
|
>80 | 520 lm |