OT FIT 75/220...240/500 D NFC FL
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
220 240 V
Frecuencia de red
0/50/60 Hz Hz
Tensión de entrada
198 264 V
Tensión cc
176 276 V
Current set
NFC
Factor de potencia λ
070C 099
Efficiency in full-load
93 %
Pérdida de potencia del equipo
6,0 W
Corriente de encendido IP
20.8 mA
Nº de ECE máximos con automátic 10 A (B)
17
Nº de ECE máximos con automátic 10 A (B)
-
Nº de ECE máximos con automátic 16 A (B)
38
Nº de ECE máximos con automátic 16 A (B)
-
Nº de ECE máximos con automátic 25 A (B)
-
Resis. a la sobretensión (L/N-tierra)
2 kV
Tensión de aislamiento (L-N)
1 kV
Tensión de salida
54 216 V
Corriente de salida
125...500 mA
Default output current
125 mA
Output PSTLM
≤1
Output SVM
≤0.4
Potencia de salida
10 75 W
Potencia de salida máxima
75 W
U-OUT
< 250 V
Corriente de salida tolerancia
±3 %
Corriente de salida rizada (100 Hz)
≤ 1 %
Distorsión armónica total
< 10 %
Dimensiones y peso
Distancia entre taladros longitud
270,0 mm
Peso del producto
20500 g
Sección de cable, entrada
0,5 1,5 mm²
Sección de cable, salida
0,5 1,5 mm²
Long aislamiento parte de la entrada
8,0 9,0 mm
Largo
2800 mm
Alto
160 mm
Long aislamiento parte de la salida
8,0 9,0 mm
Ancho
300 mm
Colores y materiales
Material de la carcasa
Metal
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-25 +50 °C
Temp. máx. en el punto de prueba tc
75 °C
Temp. máx de la carcasa en caso de fallo
110 °C
Temperatura de almacenamiento
-40 +85 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
100000 / 50000 h
Capacidades
Regulable
No
Protección contra sobrecalentamiento
Desconexión automática, reversible
Protección contra sobrecarga
Automático reversible
Protección contra cortocircuito
Automático reversible
Prueba de no carga
Sí
Intended for no-load operation
No
Longitud cableado máx. ECE/lámpara
2,0 m
Apto para luminarias con clase de prot.
I
Number of channels
1
Apto para iluminación de emergencia
Sí
Función de lumen constante
Programmable
Programming
Programming device
FEIG
Tuner4TRONIC Field App
Sí
Certificados & Normas
Símbolos de homologación
CE / EL / VDE-ENEC / EAC / CCC / RCM / BIS
Normas
Según IEC 61347-1/Según IEC 61347-2-13/Según IEC 62384/Según IEC 62386/Según IEC 61000-3-2/Según IEC 61000-3-3/Según IEC 61547
Tipo de protección
IP20
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
05-05-2023
Primary Article Identifier
4062172063968
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
f2fbb043-e37a-4652-b3cc-431fe9c3d28e
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4062172063968 |
UNV
| 1 | 205.00g | ||
4062172063975 |
VS
| 20 | 309mm x 175mm x 78mm | 4238.00g | 4.22dm³ |
Descargas
Más sobre la familia de productos
Características del producto
- Frecuencia de línea: 0 Hz | 50 Hz | 60 Hz
- Tensión de suministro: 220 240 V
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OT FIT 25/220...240/250 D NFC FL
|
54 216 V | 35...250 mA | 2800 mm | 300 mm | 160 mm | |||
OT FIT 35/220...240/400 D NFC FL
|
54 216 V | 75 400 mA | 2800 mm | 300 mm | 160 mm | |||
OT FIT 75/220...240/500 D NFC FL
|
54 216 V | 125...500 mA | 2800 mm | 300 mm | 160 mm |