OT FIT 1000/220...400/1A6 D NFC HC 2CH B L
Beneficios del producto
- Very high efficiency (up to 97%)
- Protection against 4 kV burst and 2 kV surge voltage (L-N and L-N/PE)
Áreas de aplicación
- Horticulture lighting
- Industry lighting
- Apto para luminarias con clase de protección I
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
220 400 V
Frecuencia de red
50 60 Hz
Tensión de entrada
198 440 V
Current set
NFC
Factor de potencia λ
> 098
Efficiency in full-load
97 %
Pérdida de potencia del equipo
50 / 30 W
Corriente de encendido IP
9.6 / 15.9 A
Nº de ECE máximos con automátic 10 A (B)
-
Nº de ECE máximos con automátic 10 A (B)
-
Nº de ECE máximos con automátic 16 A (B)
3 / 8
Nº de ECE máximos con automátic 16 A (B)
3 / 8
Nº de ECE máximos con automátic 25 A (B)
5 / 12
Resis. a la sobretensión (L/N-tierra)
2 kV
Tensión de aislamiento (L-N)
2 kV
Tensión de salida
150 550 V
Corriente de salida
400 1600 mA
Output PSTLM
≤1
Output SVM
≤0.4
Potencia de salida
400 1050 W
Potencia de salida máxima
1050 W
Default output current
400 mA
Aislamiento galvánico
Non isolated
Corriente de salida rizada (100 Hz)
< 1 %
Dimensiones y peso
Distancia entre taladros longitud
258.0 mm
Peso del producto
140000 g
Alto
430 mm
Ancho
1360 mm
Largo
3120 mm
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-25 +50 °C
Temp. máx. en el punto de prueba tc
65 °C
Temp. máx de la carcasa en caso de fallo
110 °C
Temperatura de almacenamiento
-40 +85 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
100000 / 50000 h
Datos adicionales del producto
Encapsulado
No
Capacidades
Regulable
No
Protección contra sobrecalentamiento
Sí
Protección contra sobrecarga
Sí
Protección contra cortocircuito
Sí
Prueba de no carga
Sí
Intended for no-load operation
No
Longitud cableado máx. ECE/lámpara
2.5 m
Apto para luminarias con clase de prot.
I
Control interface
NFC
Number of channels
2
Programming
Tuner4TRONIC
Sí
Programming device
DALI magic / FEIG
Tuner4TRONIC Field App
Sí
Certificados & Normas
Símbolos de homologación
CE
Normas
Según EN 61347-1/Según EN 61347-2-13/Según EN 62384/Según EN 61000-3-2/Según EN 61000-3-3/Según EN 61547
Tipo de protección
IP20
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
28-04-2023
Primary Article Identifier
4052899624429
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
07d89647-7455-414d-8bb4-4a707ac622e7
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4052899624429 |
UNV
| 1 | 312mm x 136mm x 43mm | 1400.00g | 1.82dm³ |
4052899624443 |
VS
| 5 | 345mm x 265mm x 165mm | 7468.00g | 15.09dm³ |
Descargas
Más sobre la familia de productos
Características del producto
- 1- and 2-channels drivers
- Line frequency: 47.5 60 Hz
- Versatile scope of application due to output power range of up to 1050 W
- Supply voltage: 220 240 V / 400 V
- Available with output current range: up to 1,600 mA
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OT FIT 500/220...400/1A6 D NFC HC B L
|
150 550 V | 400 1600 mA | 3120 mm | 1360 mm | 430 mm | |||
OT FIT 1000/220...400/1A6 D NFC HC 2CH B L
|
150 550 V | 400 1600 mA | 3120 mm | 1360 mm | 430 mm |