OT FIT 75/220...240/1A4 NFC L
Beneficios del producto
- Fulfilling SVM (≤ 0.4) and PsT (≤ 1.0) standards
Áreas de aplicación
- Instalación en sistemas de iluminación de emergencia conforme a IEC 61347-2-13, apéndice J
- Apto para luminarias con clase de protección I
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
220 240 V
Frecuencia de red
50/60 Hz
Tensión de entrada
198 264 V
Tensión cc
176 276 V
Current set
NFC
Factor de potencia λ
084C098
Efficiency in full-load
90 %
Pérdida de potencia del equipo
7,0 W
Corriente de encendido IP
≤ 40 A
Nº de ECE máximos con automátic 10 A (B)
8
Nº de ECE máximos con automátic 10 A (B)
-
Nº de ECE máximos con automátic 16 A (B)
13
Nº de ECE máximos con automátic 16 A (B)
-
Nº de ECE máximos con automátic 25 A (B)
-
Resis. a la sobretensión (L/N-tierra)
2 kV
Tensión de aislamiento (L-N)
1 kV
Tensión de salida
20 51 V
Corriente de salida
600 1400 mA
Output PSTLM
≤1
Output SVM
≤0.4
Potencia de salida
29 72 W
Potencia de salida máxima
72 W
Dimensiones y peso
Distancia entre taladros longitud
270,0 mm
Peso del producto
20000 g
Sección de cable, entrada
0,5 1,5 mm²
Long aislamiento parte de la entrada
8,0 9,0 mm
Largo
2800 mm
Long aislamiento parte de la salida
8,0 9,0 mm
Alto
210 mm
Ancho
300 mm
Colores y materiales
Material de la carcasa
Metal
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-25 +50 °C
Temp. máx. en el punto de prueba tc
75 °C
Temp. máx de la carcasa en caso de fallo
110 °C
Temperatura de almacenamiento
-40 +85 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
100000 h
Capacidades
Regulable
No
Protección contra sobrecalentamiento
Desconexión automática, reversible
Protección contra sobrecarga
Automático reversible
Protección contra cortocircuito
Automático reversible
Prueba de no carga
Sí
Intended for no-load operation
No
Longitud cableado máx. ECE/lámpara
2,0 m
Apto para luminarias con clase de prot.
I
Number of channels
1
Apto para iluminación de emergencia
Sí
Programming
Programming device
FEIG
Box programming
Yes
Certificados & Normas
Símbolos de homologación
CE / VDE-ENEC / EAC / CCC / BIS / RCM
Normas
Según IEC 61347-1/Según IEC 61347-2-13/Según IEC 62384/Según IEC 62386/Según IEC 61000-3-2/Según IEC 61000-3-3/Según IEC 61547
Tipo de protección
IP20
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
24-05-2023
Primary Article Identifier
4062172064040
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
02abfbc1-1667-4d08-9c86-d36cbdb0f6a7
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4062172064040 |
UNV
| 1 | 200.00g | ||
4062172211833 |
VS
| 10 | 309mm x 120mm x 78mm | 2101.00g | 2.89dm³ |
Descargas
Más sobre la familia de productos
Características del producto
- Frecuencia de línea: 0 Hz | 50 Hz | 60 Hz
- Tensión de suministro: 220 240 V
- Disponible con rango de salida de corriente: hasta 1,400 mA
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OT FIT 25/220...240/500 NFC L
|
20 51 V | 170 500 mA | 2800 mm | 300 mm | 210 mm | |||
OT FIT 35/220...240/700 NFC L
|
20 51 V | 250 700 mA | 2800 mm | 300 mm | 210 mm | |||
OT FIT 75/220...240/1A4 NFC L
|
20 51 V | 600 1400 mA | 2800 mm | 300 mm | 210 mm |