OTe 18/220 240/350 PC
Beneficios del producto
- Carcasa compacta para el montaje en espacios muy reducidos
- Compatible con los reguladores de fase avanzados y de control de corte de fase más comunes
Áreas de aplicación
- Apto para instalaciones de interiores
- Apto para instalaciones de interiores SELV
Datos técnicos
Datos eléctricos
Tensión de entrada nominal
220 240 V
Frecuencia de red
50/60 Hz
Tensión de entrada
198 264 V
Distorsión armónica total
15 %
Factor de potencia λ
088C097
Efficiency in full-load
86 %
Pérdida de potencia del equipo
3,0 W
Corriente de encendido IP
5 A
Nº de ECE máximos con automátic 10 A (B)
53
Nº de ECE máximos con automátic 16 A (B)
84
Nº de ECE máximos con automátic 25 A (B)
-
Resis. a la sobretensión (L/N-tierra)
1 kV
Tensión de aislamiento (L-N)
1 kV
Tensión de salida
27 54 V
U-OUT
50 V
Corriente de salida
350 mA
Corriente de salida tolerancia
±10 %
Corriente de salida rizada (100 Hz)
< 35 %
Output PSTLM
≤1
Output SVM
≤0.8
Potencia de salida
19 W
Potencia de salida máxima
19 W
Aislamiento galvanizado prim./secund.
SELV
Current set
Fixed current
Dimensiones y peso
Distancia entre taladros longitud
-
Distancia entre taladros anchura
-
Peso del producto
9300 g
Sección de cable, entrada
0,75 1,5 mm²
Sección de cable, salida
0,5 1,5 mm²
Long aislamiento parte de la entrada
8,0 9,0 mm
Long aislamiento parte de la salida
8,0 9,0 mm
Alto
300 mm
Largo
950 mm
Ancho
530 mm
Colores y materiales
Material de la carcasa
Plastic
Temp. y condiciones de funcionamiento
Margen de temperatura ambiente
-20 +50 °C
Temp. máx. en el punto de prueba tc
75 °C
Temp. máx de la carcasa en caso de fallo
110 °C
Temperatura de almacenamiento
-25 75 °C
Humedad en el aire
5 85 %
Duración de vida
ECE vida útil
50000 h
Capacidades
Regulable
Sí
Interfaz DIM
Phase Cut
Margen de regulación
10 100 %
Regulador
Amplitude Modulation
Protección contra sobrecalentamiento
Desconexión automática, reversible
Protección contra sobrecarga
Automático reversible
Protección contra cortocircuito
Automático reversible
Prueba de no carga
Sí
Intended for no-load operation
No
Longitud cableado máx. ECE/lámpara
2,0 m
Apto para luminarias con clase de prot.
I / II
Tipo de conexión, salida lateral
Terminal a presión
Apto para cableado continuo
No
Certificados & Normas
Símbolos de homologación
CE / ENEC 10 / VDE / CB
Normas
Según IEC 61347-1/Según IEC 61347-2-13/Según IEC 62384/Según CISPR 15/Según IEC 61000-3-2/Según IEC 61000-3-3/Según IEC 61547
Tipo de protección
II
Tipo de protección
IP20
Datos logísticos
Número estadístico de material
85044083900
Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration
05-05-2023
Primary Article Identifier
4052899105348
Candidate List Substance 1
Lead
CAS No. of substance 1
7439-92-1
Safe Use Instruction
The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database
57669464-49fd-40ec-ac45-64d14aa31c37
Información de embalaje
EAN |
Unidad |
Pieza |
Dimensiones |
Peso |
Volumen |
---|---|---|---|---|---|
4052899105348 |
UNV
| 1 | 95mm x 53mm x 30mm | 93.00g | 0.15dm³ |
4052899105355 |
VS
| 20 | 284mm x 207mm x 100mm | 2138.00g | 5.88dm³ |
Descargas
Accesorios opcionales
Más sobre la familia de productos
Características del producto
- Regulable mediante fase inicial/corte de fase
Ecodesign regulation information:
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Intended for use with LED modules.
The forward voltage of the LED light source shall be within the defined operating window of the control gear in all operating conditions including dimming if applicable.
Separate control gear and light sources must be disposed of at certified disposal companies in accordance with Directive 2012/19/EU (WEEE) in the EU and with Waste Electrical and Electronic Equipment (WEEE) Regulations 2013 in the UK. For this purpose, collection points for recycling centres and take-back systems (CRSO) are available from retailers or private disposal companies, which accept separate control gear and light sources free of charge. In this way, raw materials are conserved and materials are recycled.
Productos
Nombre del producto |
|
|
|
|
|
Fichas técnicas | ||
---|---|---|---|---|---|---|---|---|
OTe 10/220
240/700 PC
|
7 14 V | 700 mA | 950 mm | 530 mm | 250 mm | |||
OTe 13/220
240/350 PC
|
18 38 V | 350 mA | 950 mm | 530 mm | 250 mm | |||
OTe 18/220
240/500 PC
|
18 36 V | 500 mA | 950 mm | 530 mm | 300 mm | |||
OTe 18/220
240/350 PC
|
27 54 V | 350 mA | 950 mm | 530 mm | 300 mm |